17-7 PH / 1.4568 / S17700 Material
Leave a message
In industries where high strength, excellent fatigue resistance, and dimensional stability are critical, 17-7 PH stainless steel has become an increasingly popular material choice. Known under multiple designations-17-7 PH, EN 1.4568, and UNS S17700-this precipitation-hardening stainless steel bridges the performance gap between conventional austenitic grades and high-strength alloys.
This article provides a comprehensive technical overview of 17-7 PH / 1.4568 / S17700 material, covering its chemical composition, mechanical properties, heat treatment behavior, and key applications.

What Is 17-7 PH / 1.4568 / S17700 Material?
17-7 PH (UNS S17700, DIN 1.4568, AISI 631) is a precipitation-hardening stainless steel known for its high strength, hardness, excellent fatigue life, good corrosion resistance, and formability, making it ideal for aerospace springs, diaphragms, and precision parts; it's an austenitic steel in the annealed state that transforms to martensitic with age-hardening heat treatments (like TH 1050), gaining high strength with minimal distortion.
What are the equivalent materials for 17-7 PH stainless steel?
Equivalent materials for 17-7 PH stainless steel (UNS S17700, AISI 631) are identified by various standards, including AMS 5528, 5529, 5644, 5678, and ASTM A313, A564, A693 (Type 631), along with DIN 1.4568, all referencing this high-strength precipitation-hardened alloy known for its excellent strength and corrosion resistance in various tempers like RH950, TH1050, and CH900.


What are the main advantages of 17-7 PH stainless steel?
17-7 PH stainless steel's main advantages are its exceptional combination of high strength, hardness, excellent fatigue resistance, and good corrosion resistance, achieved through simple heat treatments with minimal distortion, making it ideal for demanding aerospace parts like springs, fasteners, and structural components requiring high strength-to-weight ratios and reliability at elevated temperatures (up to 900°F).
Chemical Composition
The chemical composition of stainless steel grade 17-7 PH is outlined in the following table.
| Element | Content (%) |
|---|---|
| Chromium, Cr | 16-18 |
| Nickel, Ni | 6.50 - 7.75 |
| Manganese, Mn | 1 max |
| Silicon, Si | 1 max |
| Aluminum, Al | 0.75 - 1.50 |
| Carbon, C | 0.09 max |
| Phosphorous, P | 0.040 max |
| Sulfur, S | 0.030 max |
| Iron, Fe | Balance |
Physical Properties
The physical properties of stainless steel grade 17-7 PH are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.80 g/cm3 | 0.282 lb/in3 |
Mechanical Properties
The following table shows mechanical properties of stainless steel grade 17-7 PH (TH1050, bar and forgings).
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 1170 MPa | 170000 psi |
| Yield strength | 965 MPa | 140000 psi |
| Modulus of elasticity | 204 GPa | 29600 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break | 6% | 6% |
| Hardness, Rockwell C | 38 | 38 |
Thermal Properties
The thermal properties of stainless steel grade 17-7 PH are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal conductivity | 16.4 W/mK | 114 BTU in/hr.ft2.°F |
| Thermal expansion co-efficient (@0.000-100°C/32-212°F) | 11 µm/m°C | 6.11 µm/m°C |
Is 17-7 PH the same as 1.4568 stainless steel?
Yes.17-7 PH, 1.4568, and S17700 refer to the same material, defined by different standards (ASTM, EN, and UNS). The chemical composition is identical; only the naming system differs.
Is 17-7 PH corrosion resistant?
17-7 PH offers good corrosion resistance in atmospheric and mildly corrosive environments, though it is generally less corrosion resistant than 316 stainless steel.
What are the differences between 17-7 PH and 316 stainless steel?
17-7 PH is a precipitation-hardening stainless steel with higher strength, hardness, and fatigue resistance, making it ideal for springs and fasteners in the aerospace industry. 316, on the other hand, is a general-purpose austenitic stainless steel. Due to its molybdenum content, it offers excellent corrosion resistance (especially against chlorides and acids), making it more suitable for marine or chemical environments. However, its overall strength is lower than that of heat-treated 17-7 PH.
What are the differences between 17-7 PH and 17-4 PH stainless steel?
17-4 PH has higher strength and hardness, making it ideal for structural components. 17-7 PH, however, offers superior ductility, formability, and excellent spring properties, and is often used for flexible components in the aerospace industry. Compared to the martensitic structure of 17-4 PH, 17-7 PH has a more complex semi-austenitic structure, requiring more precise processing.







