Product Knowledge

Stainless steel welding defects are imperfections that compromise mechanical strength, corrosion resistance, or both. They fall into structural (affect weld integrity) and surface/corrosion (affect lo

430 (UNS S43000) is a nickel-free ferritic stainless steel (~16–18% Cr, <0.75% Ni) that is the dominant cost-effective choice for elevator cabs and doors in moderate-humidity environments. It offers

For stainless steel heat-exchanger tubes, ASTM A213/A213M is a key standard for seamless ferritic and austenitic alloy-steel tubes, typically covering 3.2–127 mm ID and 0.4–12.7 mm wall thickness, wit

304+Q235B Stainless Steel Clad Plate is a composite steel plate combining a Q235B low-carbon structural steel base with a 304 austenitic stainless steel cladding layer, bonded by explosive welding or

Q345R+316L explosive clad stainless steel plate is a composite steel plate manufactured by bonding a Q345R low-alloy steel base plate with a 316L austenitic stainless steel cladding through explosive

Stainless steel clad plate is a composite material formed by bonding a stainless steel layer to a base layer of carbon steel or low-alloy steel. It combines the corrosion resistance of stainless steel

The ASTM / UNS equivalent for EN 1.4362 (X2CrNiN23-4, commonly known as Alloy 2304) duplex stainless steel is UNS S32304.

ASTM A240 UNS S32304 (also known as Alloy 2304 or EN 1.4362) is a lean duplex stainless steel plate with a balanced micro-structure of roughly 50% ferrite and 50% austenite. It features high chromium

UNS S32304 / EN 1.4362 (Alloy 2304) is a lean duplex stainless steel with a balanced microstructure of roughly 50% austenite and 50% ferrite, offering high mechanical strength and corrosion resistance

Super Duplex 2507 (UNS S32750 / Werkstoff 1.4410) is a high-performance super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel. It delivers extreme mechanical strength (yield str

AMS 5528 is an aerospace material specification for 17-7PH (UNS S17700) stainless steel (in the form of sheet, strip, and coil). This specification covers a semi-austenitic precipitation-hardening all

The primary difference between 17-4PH H900 and H1150 is their heat-treatment aging temperature, which results in opposing mechanical profiles. H900 is aged at 900°F for maximum strength and hardness (