347 / 1.4550 High-Temperature Pipe Applications in Petrochemical Industry
347 stainless steel, also known as EN 1.4550 or X6CrNiNb18-10, is a stabilized austenitic stainless steel grade with excellent resistance to intergranular corrosion, thermal fatigue, and creep deformation. In high-temperature, high-pressure service conditions - especially where welding is involved - 347 pipes are a preferred solution in the petrochemical industry.
Why Use 347 / 1.4550 Pipe in Petrochemical Systems?
347/1.4550 pipes are selected in petrochemical systems. With the Nb-stabilized austenite structure, they have both creep resistance (10⁵-hour endurance strength ≥100MPa) and mechanical strength (550℃ yield strength ≥200MPa) at 550-850℃, and resist thermal stress fatigue; intergranular corrosion protection without solid solution treatment after welding, combined with RT/ET flaw detection welding or seamless process, meets high pressure (≥10MPa) and clean requirements; non-magnetic stable structure and ASME VIII/EN 13480 certification make it the preferred choice for corrosion resistance, reliability and compliance of key equipment such as hydrogenation reactors and catalytic cracking pipelines.
EN 1.4550 seamless pipe for refinery



Frequently asked questions
🔹 Is 347 / 1.4550 better than 304 or 316 for high-temperature piping?
Yes. 347 offers better long-term heat resistance and avoids weld decay due to niobium stabilization. 304 and 316 may suffer intergranular corrosion after welding in high-temp service.
🔹 Can 347 stainless steel pipe handle cyclic thermal stress?
Yes. Its austenitic structure and creep strength allow good performance in thermal cycling environments common in reformers and cracker units.
🔹 What's the difference between 347 and 347H?
347H has a higher carbon content (0.04–0.10%), improving creep resistance further at temperatures above 600°C. Use 347H for more demanding thermal exposure.
347 / 1.4550 Pipe Specification
Standard: ASTM A312 / EN 10216-5 / ASTM A213
Grade: 347 / 1.4550
Form: Seamless and Welded Pipe
Size Range: 1/2" – 24" OD (DN15–DN600)
Wall Thickness: SCH10S to SCH160 / XXS
Finish: Pickled, Polished, Bright Annealed
Certificates: EN 10204 3.1, PED 2014/68/EU, NACE MR0175


We supply 347 / 1.4550 stainless steel pipes-both seamless and welded-engineered for long-term performance in high-temperature, corrosive environments. All pipes come with complete EN 10204 3.1 certificates, NDT reports, and global shipping support.
✅ In-stock sizes for heat exchangers, furnaces, reformers
✅ Cut-to-length, polishing, and testing on request
✅ Fast quotations within 12 hours







