ASME SB167 Inconel 600 Seamless Tube for Hydrogenation Reactors
Leave a message
ASME SB167 standard specifies the requirements for seamless nickel-chromium alloy tubes, ensuring their quality and suitability for critical engineering processes such as hydrogenation. ASME SB167 Inconel 600 seamless tube is a high-performance nickel-chromium alloy tube manufactured from INCONEL® 600 alloy, specifically designed for hydrogen reactors and other demanding applications.
Produced through a seamless process, Inconel 600 tubing is suitable for both high-temperature applications up to 2000°F (≈1200°C) and low-temperature service. This manufacturing process provides greater strength and reliability for use in chemical processing, aerospace, and power generation industries, where materials are required to perform under extreme operating conditions.
ASME SB167 N06600 Nickel Chromium Iron Alloys Seamless Tube Equivalent Grades
|
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
|
Inconel 600 |
2.4816 |
N06600 |
NCF 600 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NC15FE11M |
NiCr15Fe |
Alloy inconel 600 steel seamless tube Specifications
|
Specifications |
ASME SB167 |
|---|---|
|
Alloy 600 Tubes Size |
15 NB to 150 NB IN |
|
ASTM B167 UNS N06600 Tubing Wall Thickness |
.035" -.095', (special wall thicknesses available) |
|
Specialized in |
Small Diameter Size |
|
SB 167 UNS N06600 Tubing Type |
Seamless |
|
Inconel 2.4816 Tubes Condition |
Hot-Finished, Cold-Drawn, Polished, AP (Annealed & Pickled), BA (Bright & Annealed) |
|
ASTM B167 N06600 Tubes Form |
Round, U-Tube, Straight, Condenser |
|
Nickel Alloy 600 Tubes Length |
Single Random, Double Random & Cut Length. |
|
End |
Plain End, Beveled End |
|
Marking |
All 2.4816 Alloy 600 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer's request.) |
|
Material Test Certificates (MTC) |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
ASME SB167 N06600 Nickel Chromium Iron Alloys Seamless Tube
|
Outside diameter |
Wall thickness |
Length |
|---|---|---|
|
5.0 ~ 203.2mm |
As per requirement |
Upto 6 Meters |
ASME SB167 N06600 Nickel Chromium Iron Alloys Seamless Tube Chemical Composition
|
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
|
Inconel 600 |
0.15 max |
1.00 max |
0.50 max |
0.015max |
0.50 max |
6.00 – 10.00 |
72.00 min |
14.00 – 17.00 |
ASME SB167 N06600 Nickel Chromium Iron Alloys Seamless Tube Mechanical Properties
|
Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
|
Inconel 600 |
8.47 g/cm3 |
1413 °C (2580 °F) |
Psi – 95,000 , MPa – 655 |
Psi – 45,000 , MPa – 310 |
40 % |
GNEE is a leading manufacturer and supplier of Inconel 600 tubing products. These tubing conforms to ASTM B167, B829, and B517 specifications. The tubing is available in various sizes according to ASTM, ASME, and API standards. Inconel 600 seamless tubing is available in diameters from 4 mm to 219 mm, while welded and EFW tubing range from 5 mm to 1219.2 mm, with wall thicknesses from 0.5 mm to 20 mm. Alloy 600 seamless tubing is produced using a cold rolling process, resulting in low absolute roughness and high dimensional accuracy. These tubing is suitable for instrumentation applications and is specifically designed for large-diameter pipelines.
Ready Stock Available Of Inconel 600 Tube
| Alloy 600 Hollow Pipe | 600 Alloy Electropolished Pipe |
| ASTM B167 600 Inconel Custom Pipe | ASTM B167 inconel 600 Capillary Pipe |
| Alloy 600 UNS N06600 Round Pipe | alloy 600 Exhaust Pipe |
| 600 Alloy Square Pipe | Inconel 600 Thin Wall Pipe |
| alloy 600 Rectangular Pipe | Small diameter inconel 600 pipe |
| Inconel 600 Hexagonal Pipe | Nickel Alloy 600 Pipe material |
| inconel 600 Bush Hex Pipe | 2.4816 Alloy 600 Clad Pipe |
| Nickel Alloy 600 Fabricated Pipe | ASTM B167 600 Alloy Annealed pipe |
| 2.4816 Alloy 600 Beveled End Pipe | Inconel Alloy 600 Rectangle Pipe |
| UNS N06600 Cold Drawn Pipe | Cold Drawn ASTM B167 inconel 600 Welded Pipe |
