Home - Knowledge - Details

ASTM A213 TP321 Pickled And Annealed Stainless Steel Boiler Tubes

​​ASTM A213 TP321 stainless steel seamless boiler tubes​​ are engineered for high-temperature and high-pressure service in boiler and heat exchanger applications.
The ​​ASTM A213 TP321 seamless tubes​​ supplied by GNEE are produced by extruding hot billets through a metal-grade process. This method ensures the pipes have ​​no seams or welds​​, providing ​​exceptional load-bearing capacity under varying environmental conditions​​.
ASTM A213 TP321 stainless steel heat exchanger tubes​​ can be either ​​hot-rolled or cold-rolled​​, followed by further heat treatment. Typically, the tubes are ​​annealed at around 1605°F (874°C)​​ and then subjected to a ​​water-quenching process​​, enhancing their ​​corrosion resistance​​.
With a ​​density of 8.27 g/cm³​​, 321 stainless steel seamless tubes offer reliable performance. The cross-sectional shapes of these tubes can be ​​round, square, or rectangular​​, allowing them to adapt to diverse applications. ​​EN 1.4541 pipes​​ (equivalent to TP321) can be customized into various shapes and dimensions.
ASTM A213 TP321 Stainless steel condenser pipes are commonly used in ​​expansion joints, heat exchangers, furnace components, aircraft exhaust manifolds, bellows​​, and other critical applications.
If you have any questions about our products, specific requirements, or need customized solutions, please visit us or contact us for more information.

Email: info@gneestainless.com

SA213 TP321 Stainless Steel pipe
 
TP321 Stainless Steel pipe

Surface Condition of SA213 TP321 Stainless Steel pipe
Cold-rolled ferritic alloy steel pipe shall be free of scale and suitable for inspection. Minor oxidation shall not be considered scale.
Hot-rolled SA213 TP321 ferritic alloy steel pipe shall be free of loose scale and suitable for inspection.
SA213 TP321 stainless steel pipe shall be pickled until free of scale. SA213 TP321 When bright annealed, pickling is not required. Any special surface treatment requirements should be determined by negotiation between the supplier and the buyer.

 

ASTM A213 TP 321 Seamless Tube Specifications

Standard ASTM A213/ASME SA213
Grade TP321 stainless steel
Tube Type Seamless Tube
Finishes Annealing Pickling
Bright Annealing
Outside Diameter 1/8″ – 5″
Thickness 0.015″ – 0.500″
Length Fixed And Random Length
Application Boiler, Heat Exchanger, Super Heater

 

tp 321 Stainless Steel Tube Mechanical Properties Chemical Composition % Max

C Mn P S Si Cr Ni Ti
0.08 2 0.045 0.03 1 17-19 9-12 5(C + N)- 0.70

 

ASTM A213 TP 321 Stainless steel heat exchanger tubes Mechanical Property

Gr. Tensile Strength min Yield Strength min Elongation (%) Brinel/Vickers Rockwell
TP321 75ksi ( 515MPa ) 30ksi ( 205MPa ) 35 min 192HBW/200HV 90HRB

 

What's the difference between ASTM A213 TP321H and TP321?

321 stainless steel pipe has a lower carbon content (≤0.08%) and no minimum carbon content requirement. It prioritizes intergranular corrosion resistance but doesn't guarantee high-temperature strength. Therefore, it cannot directly replace TP321H for high-temperature, pressure-containing components compliant with ASME standards.

 

If you have project requirements for 321H stainless steel pipe, please feel free to place an order. GNEE maintains a large inventory of popular products for you to choose from. Available in both seamless and welded configurations, contact our factory for detailed chemical composition and free samples. We offer competitive pricing and excellent service.

In addition we also provide the following ASTM A213 stainless steel pipes.

ASTM A213 TP 321 Stainless steel heat exchanger tubes

Quality Control System
Implementation:
Raw material PMI verification
In-process EC/UT non-destructive testing
100% dimensional inspection
All inspection records and photos are traceable, and SGS/TUV sampling reports are provided. Our three-level quality control system ensures consistent composition and performance for every batch of TP321 products, streamlining the incoming product inspection process for distributors.

TP 321 Stainless steel heat exchanger tubes

 

Packing and Marking

Packaged in waterproof paper and steel strapping, these products meet standard export seaworthy packaging requirements and are suitable for various shipping methods. Customized options are also available upon request.

 SA213 TP321 Stainless Steel pipe

Send Inquiry

You Might Also Like