ASTM A276 Stainless Steel 316Ti Rods
Leave a message
GNEE Steel is one of the well-known trader and manufacturer of SS 316Ti Rods, which can be utilized for protracted periods at high temperatures devoid of conceding its corrosion resistance. As it is similar to 316, these ASME SA 276 Stainless Steel TP316Ti Rods can be utilized at high temperatures. Also acknowledged as Grade WR 1.4571 Rods, it maintains physical and mechanical features same as standard grades of Stainless Steel 316. The prime gain of Stainless Steel UNS S31635 Rods is that it can be used at superior temp for a lengthier time devoid of sensitization in the works. ASTM A276 SS 316Ti Rods displays us resistance to acids, like sulfuric acids, acid sulfates and hydrochloric acids .ASTM A276 Stainless Steel 316Ti Rods is a single stage austenitic alloy at all temp up to the melting stage, where it cannot be hard-bitten by heat action. Buy SUS 316Ti Stainless Steel Bars at reasonable price from us.
316Ti Stainless Steel Rods Specification :
| Standard: | : | ASTM, ASME, AISI A 276 , SA 276 |
| Specifications: | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| range: | : | 3.17 MM TO 350 MM DIA |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Stainless Steel Round Rods | : | Outside Diameter in the range of 4mm to 500mm |
| Stainless Steel Hex Rods | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| Stainless Steel Flats: | : | 1/2" to 10" in thickness range of 2mm to 150mm, Custom Size Stainless Steel Flats available |
| Finish: | : | Bright, Polish & Black |
| Condition: | : | Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished |
| Form : | : | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
ASTM A276 Stainless TP316Ti Rods Equivalent Grades
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| SS 316Ti | S31635 | 1.4571 | Z6CNDT17‐12 | X6CrNiMoTi17-12-2 | SUS 316Ti | 320S31 | 08Ch17N13M2T |
UNS S31635 Stainless Steel Rod Chemical Composition
| Grade | C | Ni | Si | N | S | Mn | P | Cr | Mo | |
| SS 316Ti | min. | - | 10.0 | - | - | - | - | - | 16.0 | 2.00 |
| max. | 0.08 | 14.0 | 0.75 | 0.10 | 0.030 | 2.00 | 0.045 | 18.0 | 3.00 | |
WERKSTOFF NR. 1.4571 SS Rods Mechanical Properties
| Grade | Tensile Strength (MPa) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (MPa) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| SS 316Ti | 515 | 35 | 205 | 75 | 205 |
