Home - Knowledge - Details

Differences between 1.4878 and 1.4961 stainless steel

When selecting stainless steel for high-temperature applications, engineers and buyers often compare EN 1.4878 (AISI 321H) and EN 1.4961 (AISI 347H). Although both are austenitic heat-resistant steels, their chemical design, temperature capability, and corrosion behavior are very different. Choosing the correct grade helps reduce maintenance cost, improve service life, and ensure safe operation.

 

What is 1.4878 stainless steel (AISI 321H)?
1.4878 stainless steel (also known as AISI 321H) is an austenitic heat-resistant stainless steel. It improves resistance to sensitization and intergranular corrosion through the addition of titanium, and exhibits excellent structural stability at high temperatures up to 850°C. It is widely used in heating tubes, heat exchangers, chemical equipment, and exhaust systems.

 

Is 1.4878 the same as 321H?

Yes, 1.4878 is the European (EN) designation for the same high-carbon, heat-resistant stainless steel grade known as 321H.

 

What is 1.4961 stainless steel?
1.4961 stainless steel (also known as AISI 347H or X15CrNiSi25-21) is a heat-resistant austenitic stainless steel suitable for high-temperature applications, such as furnace manufacturing and high-temperature equipment. It has excellent oxidation resistance and high-temperature strength, and is designed for ultra-high temperature environments up to 1150°C. This material is easy to weld, forge, and cold work.

 

1.4878 stainless steel VS. 1.4961:Chemical Composition 

Grade Cr (%) Ni (%) Si (%) C (%) Ti (%) Others
1.4878 (321H) 17.0–19.0 9.0–12.0 ≤0.75 0.04–0.10 5×C–0.8 Low Mo, balanced Mn
1.4961 (347H) 24.0–26.0 19.0–22.0 1.5–3.0 ≤0.20 - High Cr+Ni for extreme heat

 

1.4878 stainless steel VS. 1.4961:Mechanical Properties

Property 1.4878 (321H) 1.4961 (347H)
Tensile Strength (MPa) 500–700 600–750
Yield Strength (MPa) 200–300 250–350
Elongation (%) ≥40 ≥40
Hardness (HB) ≤217 ≤223
Max. Continuous Service Temp 850°C 1100–1150°C

 

1.4878 vs.1.4961 Stainless Steel :Oxidation Resistance 

1.4878 stainless steel shows excellent oxidation resistance, with oxidation loss of less than 0.1 mg/cm² after being exposed at 1100°C for 1000 hours, whereas 1.4961 stainless steel exhibits an oxidation loss of around 0.5 mg/cm² under the same conditions. However, due to the stable austenitic structure of 1.4961, it maintains better microstructural integrity at elevated temperatures, providing higher oxidation toughness in different atmospheres and delivering superior performance during long-term thermal cycling.

 

1.4878 vs.1.4961 Stainless Steel Carburization Resistance 

In terms of carburization resistance, 1.4878 stainless steel demonstrates superior performance compared with 1.4961, mainly due to its higher chromium and aluminum content. In a CO/CO₂–rich atmosphere at 950°C, its carbon penetration rate can be reduced to approximately 0.05 mm/year. Carburizing furnace test data show that after prolonged exposure, the surface hardness of 1.4878 stainless steel remains below 250 HV, while the surface hardness of 1.4961 increases to over 400 HV, indicating the formation of coarse carbides that may lead to embrittlement.

 

1.4878 vs.1.4961 Stainless Steel Sensitization Behavior (Welded Condition)

In the welded condition, 1.4878 stainless steel is less prone to sensitization than 1.4961. This is because 1.4878 contains a significant ferritic fraction, resulting in minimal chromium carbide precipitation at grain boundaries within the 450–850°C sensitization range. After aging at 700°C for 1 hour, the intergranular corrosion performance loss of 1.4878 stainless steel remains below 5%. In contrast, 1.4961 stainless steel is a fully austenitic grade that contains residual carbon and lacks stabilizers such as Ti or Nb, making it much more susceptible to severe sensitization.

 

1.4878 vs 1.4961:Cost

Grade Approx. Price Range (per ton) Cost Level
1.4878 (321H) Medium price ★★★☆☆ (Economical)
1.4961 (347H) Higher price due to high Ni & Cr ★★★★★ (Premium high-temp alloy)

 

If you have project requirements for 1.4878 or 1.4541 stainless steel, please feel free to place an order. GNEE has a large inventory of popular products for you to choose from. It can be processed into various practical product forms, including plates, coils, tubes, bars, wires, etc. For detailed chemical composition information and free samples, please contact our factory immediately. We offer competitive prices and excellent service.

Contact now

1.4878 or 1.4541 stainless steel plate
1.4878 or 1.4541 stainless steel plate
1.4878 or 1.4541 stainless steel pipe
1.4878 or 1.4541 stainless steel pipe

Send Inquiry

You Might Also Like