Duplex 1.4362 Stainless Steel Sheet
Leave a message
1.4362 belongs to DUPLEX stainless steels, offering a much greater yield strength than austenitic stainless steels. This grade provides superior corrosion resistance, tension, and cracking resistance, as well as remarkable tensile and yield strength.
What is 1.4362 Duplex Stainless Steel Plate?
1.4362 SS Plate is a lean grade duplex stainless steel alloy. Duplex alloys are composed of equally distributed ferrite and austenitic steel properties with chromium, nickel and molybdenum in defined quantities depending on the grade. Lean duplex is one of three common grades available in duplex steel.
Duplex 1.4362 is another variant of biphasic austenitic-ferritic grades with high mechanical properties and increased corrosion resistance, especially intergranular after welding and in delivery condition.Grades are used in the paper, petrochemical and fuel industries, chemical, shipbuilding, nitrogen, aerospace, construction, heat and power generation and cryogenic industries. Enhanced Duplex (abbreviated to EDX 2304™) is a "reinforced" variety of 1.4362 grade with a slightly higher content of chromium, molybdenum, carbon and proportionally lower content of nickel than the standard S32304 made on special request.

1.4362 Duplex SS Plate Thickness
| 1.4362 Duplex Stainless Steel Plate Thickness (mm) | 1.4362 Duplex Stainless Steel Plate Dimensions |
|---|---|
| 1.5 | 3m x 1.5m |
| 2.0 | 3m x 1.5m |
| 3.0 | 3m x 1.5m |
| 5.0 | 3m x 1.5m / 4m x 2m |
| 6.0 | 3m x 1.5m / 4m x 2m / 6m x 2m |
| 8.0 | 3m x 1.5m / 4m x 2m / 6m x 2m |
| 10.0 | 3m x 1.5m / 4m x 2m / 6m x 2m |
| 12.0 | 3m x 1.5m / 4m x 2m / 6m x 2m |
| 15.0 | 4m x 2m / 6m x 2m |
| 20.0 | 4m x 2m / 6m x 2m |
1.4362 Sheet Chemical Composition
Duplex Stainless Steel UNS S32304 Plate Chemical composition
| WEIGHT% | C | SI | MN | S | P | CR | NI | MO | N | CU | B |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN. | 22,00 | 3,50 | 0,10 | 0,05 | 0,10 | ||||||
| MAX. | 0,030 | 1,00 | 2,00 | 0,015 | 0,035 | 24,00 | 5,50 | 0,60 | 0,20 | 0,60 | 35 PPM |
1.4362 Stainless Steel Plate Properties
| YIELD STRENGTH RP0.2 MPA |
TENSILE STRENGTH RM MPA |
ELONGATION [%] |
HARDNESS [HB] |
IMPACT, CHARPY-V, -46ºC [J] |
PRE | |
|---|---|---|---|---|---|---|
| PLATE CR | (T<13MM) ≥ 500 | ≥ 690 | ≥ 25 | ≥ 45 | ≥ 28 | |
| PLATE HR | (T≥13MM) ≥ 420 | ≥ 630 | ≥ 25 | ≤ 290 | ≥ 45 | ≥ 28 |
1.4362 Lean Duplex Plate Physical Properties 20°C
| Density g/cm³ |
Specific heat capacity J/kg K |
Thermal conductivity W/m K |
Electrical resistivity Ω mm²/m |
|---|---|---|---|
| 7.8 | 500 | 15 | 0.8 |
Suitable welding filler materials : 1.4462







