What is the difference between 2205 and 2507?
If you are purchasing stainless steel for chemical processing equipment, offshore platforms, seawater systems, oil & gas pipelines, or high-corrosion environments, you may be comparing Duplex 2205 stainless steel and Super Duplex 2507 stainless steel.
Both materials belong to the duplex stainless steel family, combining the advantages of austenitic and ferritic stainless steels. They offer higher strength and better chloride corrosion resistance than conventional grades such as 304 and 316L.
However, 2507 is not always a better choice than 2205. The correct material depends on your corrosion environment, pressure requirements, temperature conditions, and project budget.

What Is Duplex 2205 Stainless Steel pipe?
Duplex 2205 stainless steel pipe is a high-strength, highly corrosion-resistant tubular product made from an alloy composed of approximately 50% austenite and 50% ferrite. Containing 22% chromium, 3% molybdenum, and 5%–6% nickel, the material offers twice the yield strength of standard austenitic stainless steel, thereby enabling thinner wall thicknesses and lighter structural designs.
What Is Super Duplex 2507 Stainless Steel pipe?
Super Duplex 2507 (UNS S32750 or SAF 2507) stainless steel pipe is a high-performance ferritic-austenitic (duplex) alloy containing 25% chromium, 4% molybdenum, and 7% nickel. Engineered for extreme environments requiring exceptional strength and corrosion resistance, the material primarily complies with ASTM A790 (seamless and welded pipe) and ASTM A789 (tubing) standards, making it ideal for harsh marine, chemical processing, and oil and gas operations.


What is the difference between 2205 and 2507 pipe?
The primary difference is that Duplex 2205 is a standard duplex stainless steel with moderate alloy content (PREN ~34–36), while Super Duplex 2507 features higher chromium, molybdenum, and nitrogen levels (PREN >40), delivering significantly higher strength, superior pitting resistance, and a higher cost for extreme environments.
Chemical Composition (Typical Weight %)
| Element | 2205 Duplex (UNS S32205) | 2507 Super Duplex (UNS S32750) |
| Chromium (Cr) | 22.0 – 23.0% | 24.0 – 26.0% |
| Nickel (Ni) | 4.5 – 6.5% | 6.0 – 8.0% |
| Molybdenum (Mo) | 3.0 – 3.5% | 3.0 – 5.0% |
| Nitrogen (N) | 0.14 – 0.20% | 0.24 – 0.32% |
| Carbon (C) | 0.030% max | 0.030% max |
| Iron (Fe) | Balance | Balance |
Mechanical Properties (Annealed Condition)
| Property | 2205 Duplex | 2507 Super Duplex |
| Tensile Strength (min) | 655 MPa (95 ksi) | 795 MPa (116 ksi) |
| Yield Strength 0.2% (min) | 450 MPa (65 ksi) | 550 MPa (80 ksi) |
| Elongation (min) | 25% | 15% |
| Hardness (max) | 31 HRC (293 HBW) | 32 HRC (310 HBW) |
Which is more corrosion resistant, 2205 or 2507?
2507 Is More Corrosion Resistant Than 2205. Grade 2507 Is A "Super Duplex" Stainless Steel With Higher Levels Of Chromium, Molybdenum, And Nitrogen, Giving It A Higher Pitting Resistance Equivalent Number (PREN Of 40–45) Compared To Standard Duplex 2205 (PREN Of 34–38), Meaning 2507 Handles Severe Marine Environments And Aggressive Chlorides Much Better.
Which grade is easier to weld, 2205 or 2507?
Compared to grade 2507, grade 2205 is easier to weld. Standard duplex steel 2205 offers a wider tolerance range for heat input and has a relatively lower alloy content; in contrast, super duplex steel 2507 requires strict temperature control, the use of specialized filler materials, and precise compositional balance to prevent the precipitation of brittle intermetallic phases.
Heat input limits: Grade 2205 allows for a higher maximum interpass temperature, whereas grade 2507 requires strict limitation of interpass temperature, with a lower threshold.
Microstructural sensitivity: Grade 2507 is highly susceptible to phase imbalance and the precipitation of detrimental secondary phases if cooling is improper.
Filler material requirements: Both grades require matching or over-alloyed welding consumables (e.g., ER2209 for 2205), but grade 2507 leaves very little margin for error during actual welding operations.
Is 2507 stainless steel more expensive than 2205?
Yes, the price of 2507 super duplex stainless steel is typically 30% to 50% higher than that of standard 2205 duplex stainless steel. This price difference stems from the higher content of premium alloying elements-specifically nickel, molybdenum, and nitrogen-required to manufacture super duplex stainless steel.
2205 vs. 2507 Stainless Steel Pipe: How to Choose?
When to choose Duplex 2205 piping:
Chemical processing (transporting common acids, bleaching chemicals, and petrochemical products)
Moderate marine environments (coastal outdoor exposure or clean, low-temperature water pipelines)
When to choose Super Duplex 2507 piping:
Seawater and desalination (for high-temperature or high-salinity seawater reverse osmosis/SWRO systems)
Offshore oil and gas (subsea pipelines and splash-zone structures)
2205 /2507 Stainless Steel Pipe Suppliers and Manufacturers
Are you looking to source pipe for a specific marine or chemical project, or do you need help comparing sizes and wall thicknesses (Schedules)?
Ample Inventory: We maintain stock of 2205/2507 models in warehouses in Tianjin and Anyang, shortening delivery times.
Global Logistics: Extensive export experience allows us to support various trade terms including FOB, CFR, CIF, and DDP. Packaging meets sea freight standards (e.g., fumigation-free wooden crates).
Certificates: Every shipment is supplied with complete quality certificates, including Material Test Certificates (MTC), to ensure full traceability, material compliance, and reliable quality verification.

2205 & 2507 Stainless Steel Pipe specification
| Product Form | Description | Relevant ASTM / ASME Standards |
| Seamless Pipe | Hot finished or cold drawn seamless pipes for corrosive service | ASTM A790 / ASME SA790 |
| Welded Pipe | Straight-seam welded pipes (ERW, EFW, or PAW) | ASTM A790 / ASME SA790 |
| Seamless Tube | General service tubing (Heat Exchangers, Condensers) | ASTM A789 / ASME SA789 |
| Welded Tube | Welded tubing for general service | ASTM A789 / ASME SA789 |
| Instrumentation Tubing | High-precision Bright Annealed (BA) or AP tubes | ASTM A789 |
Common Delivery Conditions
Solution Annealed & Pickled (AP): (Most common condition for industrial piping).
Bright Annealed (BA): (Commonly used for instrumentation/high-purity tubing).
Polished: (e.g., 180 Grit, 320 Grit, 400 Grit).
Common Size Range for Pipes
Pipe OD: 1/2" NB to 24" NB (Nominal Bore).
Wall Thickness: Schedule 10S, 40S, 80S, 160, and XXS.
Tube OD: 6mm to 50.8mm for instrumentation.










