What is the material of 301S81?
Leave a message
What is the material of 301S81?
301S81 is a specific grade of austenitic stainless steel wire defined by the British Standard (BS 2056) for use in mechanical springs, known for its high strength, ductility when cold worked, and good corrosion resistance, often compared to Type 301 stainless steel but with specific silicon (Si) content for enhanced spring properties, equivalent to the European X7CrNiAl17-7.




Steel 301S81 (BS ) and its European equivalent X7CrNiAl17-7 (1.4568) ( EN )
| EU EN |
USA - |
France AFNOR |
England BS |
Sweden SS |
GOST | Inter ISO |
||||||
| X7CrNiAl17-7 (1.4568) |
|
|
|
|
|
|
301S81 Application:Specification for stainless steel wire for mechanical springs
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 301S81 | UK - B.S. , BS 2056 - Specification for stainless steel wire for mechanical springs |
What is the chemical composition of 301S81 stainless steel?
| Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.09 | ||
| Si | - | 1.00 | ||
| Mn | - | 1.00 | ||
| P | - | 0.045 | ||
| S | - | 0.030 | ||
| Cr | 16.00 | 18.00 | ||
| Mo | - | - | ||
| Ni | 6.50 | 7.75 | ||
| Al | 0.75 | 1.50 |
Mechanical properties of grade 301S81 BS 2056
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 342 (≥) | 563 (≥) | 34 | 34 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
Physical properties of grade 301S81 BS 2056
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 852 (≥) | 336 (≥) | 22 | 44 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 984 | 681 | 678 |
Is 301S81 the same as AISI 631 stainless steel?
No, 301S81 is not the same as AISI 631 stainless steel-301S81 is a high-strength cold-rolled condition of AISI 301 austenitic stainless steel, while AISI 631 is a precipitation-hardening grade (17-7PH) with a different composition and heat-treatment mechanism.
What standard does 301S81 stainless steel belong to?
301S81 stainless steel belongs to the EN 10088 / EN 10151 standard system, where "S81" denotes a high-strength cold-worked condition of grade 1.4310 (AISI 301).
Is 301S81 stainless steel magnetic after cold working?
Yes, 301S81 stainless steel becomes partially to strongly magnetic after cold working due to strain-induced martensite formation, unlike solution-annealed austenitic grades.
What is 301S81 stainless steel used for?
301S81 stainless steel is widely used in applications requiring high strength and good elasticity, such as springs, clips, railway components, conveyor belts, and structural cold-formed parts.
What is the difference between 301S81 and 304 stainless steel?
Compared with 304 stainless steel, 301S81 offers significantly higher tensile strength (often > 1,500 MPa after cold work) but lower corrosion resistance and formability due to its lower nickel content.
Is 301S81 stainless steel suitable for springs and cold-formed parts?
Yes, 301S81 stainless steel is particularly suitable for springs and cold-formed parts because its cold-worked condition provides high yield strength, excellent springback, and good fatigue resistance.







