201J7 Stainless Steel Coil Strip Price Per Kg 2026
Leave a message
If you are looking for 201J7 stainless steel coil strip price per kg in 2026, the actual purchasing cost depends on more than the basic metal price. Factors including nickel and chromium content, manganese level, coil thickness, strip width, surface finish, order quantity, production process, and delivery terms directly affect the final quotation.
In 2026, 201 series stainless steel remains a popular cost-effective alternative to 304 stainless steel for applications such as kitchen equipment, decorative parts, welded tubes, and hardware components. Typical China FOB prices for 201 series stainless steel coil strips are approximately USD 1.20–1.60/kg, while precision strips with tighter tolerances or special finishes may reach higher levels.
What Is 201J7 Stainless Steel?
201J7 is a specific derivative grade of the 200-series nickel-saving austenitic stainless steel family, primarily developed by major Chinese steelmakers (such as Tsingshan Holding and Hongwang) for the low-to-mid-end consumer market. It reduces production costs by substituting manganese for nickel and increasing copper content, while maintaining good deep-drawing ductility.
201J7 stainless steel vs.304
| Performance Dimension | 201J7 Characteristics | Compared to 304 Stainless Steel |
| Corrosion Resistance | Moderate; susceptible to rusting in humid or saline/acidic environments | Significantly lower than 304 (which contains ~18% Cr and ~8% Ni) |
| Formability & Workability | High elongation; highly suitable for deep drawing, punching, and bending | Deep drawing capability close to 304; superior to standard hard-grade 201 |
| Cost & Pricing | Highly competitive cost advantage (~45%–50% the price of 304) | Serves as an economical alternative material |
201J7 Stainless Steel Application
Lightweight indoor drawn parts: washbasins, vacuum flask casings, sinks (for non-highly corrosive environments).
Decorative and structural components: indoor door and window trim, stainless steel tubing, decorative strips, security grilles.
Everyday hardware: tableware (excluding direct contact with highly acidic foods), kitchen appliance panels, appliance casings.
201J7 Stainless Steel Coil Strip Price per Kg 2026 (Reference Price)
For international buyers, stainless steel strip prices are usually quoted based on FOB China, EXW, CIF, or DDP terms. The following table provides an estimated purchasing reference for 201J7 cold rolled stainless steel coil strip.
| Product | Specification | Surface Finish | 2026 Reference Price (USD/kg) | Price Range (USD/ton) |
|---|---|---|---|---|
| 201J7 Stainless Steel Strip | 0.2–0.5 mm × Custom Width | 2B / BA | $1.45–1.70/kg | $1,450–1,700/t |
| 201J7 Stainless Steel Coil Strip | 0.5–1.5 mm | 2B | $1.25–1.55/kg | $1,250–1,550/t |
| 201J7 Stainless Steel Coil | 1.5–3.0 mm | 2B / No.4 | $1.20–1.50/kg | $1,200–1,500/t |
| Precision 201J7 Strip | 0.05–0.3 mm | BA / Polished | $1.80–2.50/kg | $1,800–2,500/t |
Note: Prices are reference values only. Actual quotations vary according to raw material market conditions, MOQ, tolerance requirements, and supplier production capacity. 201/J-series stainless steel prices in 2026 show noticeable differences between grades and processing levels.
To provide a more precise quote tailored to your specific requirements, could you please let me know:
What thickness and width do you require for the strip or coil?
What is the approximate total quantity you plan to order (in kilograms or metric tons)?
Do you have a preferred surface finish (e.g., 2B, BA, or bright annealed)?
Main Factors Affecting 201J7 Stainless Steel Coil Strip Price
1. Nickel, Chromium and Raw Material Market Fluctuations
The price of 201J7 stainless steel coil strip is strongly influenced by raw material costs, especially nickel, chromium, manganese, and stainless steel scrap prices. Although 201J7 contains less nickel than 304 stainless steel, its alloy composition still depends on nickel and ferrochrome market trends. A change of USD 100/ton in alloy raw material costs can directly impact stainless steel coil prices by approximately USD 0.05–0.10/kg. Buyers should monitor alloy surcharges and supplier quotation validity periods when purchasing large quantities.
2. Thickness, Width and Precision Processing Requirements
The dimensions of 201J7 stainless steel strip have a direct impact on production costs. Standard cold-rolled strips such as 1.0 mm × 1219 mm are usually more economical due to higher production efficiency, while thin precision strips below 0.3 mm thickness require additional rolling passes, annealing, and tighter tolerance control. For example, precision strips with thickness tolerance of ±0.01 mm may cost 10–30% higher than standard commercial strips because of increased processing requirements.
3. Surface Finish and Processing Technology
Surface treatment is another important factor affecting the final price of 201J7 stainless steel coil strip. Common finishes include 2B, BA, No.4, Hairline, and Mirror 8K. A standard 2B finish is generally the most cost-effective option, while BA and mirror finishes require additional bright annealing and polishing processes. Depending on the surface requirement, processing costs may increase by approximately USD 50–300/ton, especially for decorative applications requiring strict appearance standards.
4. Order Quantity and Supply Conditions
The purchasing volume significantly affects the unit price of 201J7 stainless steel strip. Large-volume orders allow manufacturers to optimize raw material purchasing, production scheduling, and packaging costs. Typically, orders above 20 tons can achieve more competitive factory pricing compared with small orders below 1 ton, where slitting, handling, and logistics costs represent a larger proportion of the total price. Long-term purchasing agreements can also help buyers obtain more stable prices.
5. Supplier Capability, Quality Standards and Delivery Requirements
The supplier's production capability and quality control system also influence 201J7 stainless steel coil strip pricing. Products with EN10204 3.1 material certificates, PMI testing, dimensional inspection, hardness testing, and heat number traceability may have slightly higher prices but provide better reliability for international buyers. Additional requirements such as customized widths, special packing, third-party inspection (SGS/BV/TÜV), and faster delivery schedules can increase costs by 3–10%, but they reduce quality risks and supply delays.
How to Calculate 201J7 Stainless Steel Strip Cost?
The purchasing formula is:
Total Material Cost = Weight (kg) × Price per kg
Example:
Purchase quantity:201J7 stainless steel strip
Weight: 5,000 kg
Price: USD 1.45/kg
Calculation:5,000 × 1.45 = USD 7,250
Additional costs may include:Slitting charge,Export packing,Inland transportation,Sea freight,Import duty,Local delivery cost.
How to Properly Purchase 201 J1 J2 J5 J7 Stainless Steel Coil?
When purchasing 201 J1, J2, J5, or J7 stainless steel coils, buyers should evaluate more than just the price per kg. First, confirm the exact grade, chemical composition, and application requirements, because different 201 series grades vary in nickel content, manganese level, corrosion resistance, and mechanical properties. Request a complete EN10204 3.1 MTC, PMI test report, thickness/width tolerance inspection, and surface quality records. For example, standard cold-rolled coils are usually 0.3–3.0 mm thick with widths of 1000–1500 mm, while precision strips require tighter tolerances. Comparing supplier production capability, MOQ, delivery time, and quality assurance helps avoid low-cost but unreliable materials.
201 J1 J2 J5 J7 Stainless Steel Coil/Strip Suppliers and Manufacturers
As a professional 201J7 stainless steel coil and strip supplier, GNEE provides cold-rolled 201J7 coils and precision strips with thicknesses from 0.05–3.0 mm and customized widths from 10–1250 mm. We support 2B, BA, No.4, HL surface finishes, customized slitting, and strict quality control including MTC, PMI, dimensional inspection, and surface testing. Each shipment is supplied with complete material traceability and inspection documents.
201J7 Stainless Steel Specifications
| Item | Common Supply Range |
|---|---|
| Grade | 201J7 / SUS201 / AISI 201 |
| Standard | ASTM A240 / JIS G4305 |
| Thickness | 0.05–3.0 mm |
| Width | 10–1250 mm |
| Coil ID | 300 mm / 400 mm / 500 mm |
| Surface | 2B, BA, No.4, HL |
| Edge | Slit edge / Mill edge |
| Hardness | Soft / 1/2 Hard / 3/4 Hard / Full Hard |
To assist you in finding or selecting the right material, could you please specify:
What specific application, product, or component are you manufacturing (e.g., tubing, stamped decorative parts, structural panels, etc.)?
And what surface finish do you require (e.g., 2B, BA, or polished/brushed)?
Quality Control
Professional Packaging:
We offer the option of single or double-layer 7C/10C protective films to ensure that the surface of our cold-rolled coils remains free of scratches throughout the transportation and stamping processes. Furthermore, we utilize reinforced packaging-featuring thickened waterproof paper, steel strapping, and sturdy wooden pallet supports,to prevent moisture ingress during sea freight, thereby eliminating the risk of "surface rust" (flash rust) on the 201 stainless steel.
