Home - News - Details

ASTM A213 TP304H Seamless Stainless Steel Pipe

ASTM A213/A213M covers seamless ferritic and austenitic steel boiler, superheater, and heat exchanger tubes.


ASME SA-213 TP304H stainless steel pipe is an austenitic stainless steel with high chromium and nickel content. This steel offers excellent structural stability, high endurance strength, good oxidation resistance, and excellent fabrication properties such as bending and welding. However, it is sensitive to intergranular corrosion and stress corrosion, and due to its high alloying element content, it is prone to work hardening, making it difficult to fabricate. It also has a high coefficient of thermal expansion and poor thermal conductivity.


GNEE supplies TP304H pipe in accordance with ASTM A213/A213M. Typical sizes and thicknesses are 1⁄8 inch (3.2 mm) ID and 5 inch (127 mm) OD, with minimum wall thicknesses ranging from 0.015 to 0.500 inch (0.4 to 12.7 mm), inclusive. Average wall thickness is specified on the order.


ASTM A213 ASME SA-213 TP304H Stainless Steel Tubes Quick Details

Material: TP304H, S30409

Equivalent Material: 08Ch18N10, X5CrNi18-10, 1.4301, 07Cr19Ni10, X7CrNi18-9, X6CrNi18-10, SUS 304H TB
FOB Price: US $4000-5000 / Ton | 1 Ton/Tons (Min. Order)
Specifications: 51mm*7.5mm; 63mm*4mm; 63mm*7mm, 63mm*9mm etc.
Port of Shipment:Tianjin,China
Payment:L/C or T/T
Delivery: 7-15 days after payment
Package:Standard export package,suit for all kinds of transport, or as required

Email: info@gneestainless.com

 

Chemistry Composition of ASTM A213 ASME SA-213 TP304H

C, %

Si, %

Mn, %

P, %

S, %

Cr, %

Ni, %

0.04-0.10

1.00 max

2.00 max

0.045 max

0.030 max

18.0-20.0

8.0-11.0


 

 

Mechanical Properties of ASTM A213 ASME SA-213 TP304H

Tensile Strength , MPa

Yield Strength, MPa

Elongation, %

Hardness, HB

515 min

205 min

35 min

192 max

 

 

 

 

Application of ASTM A213 ASME SA-213 TP304H Stainless Steel Tubes
Applicable conditions: ASTM A213 ASME SA-213 TP304H stainless steel pipe is mainly used to manufacture the high temperature superheater, high temperature reheater, high temperature section of platen superheater and various high temperature and high pressure resistant pipe fittings of large power generation boiler with subcritical 'supercritical pressure parameters.
Allowable operating temperature: for pressure parts, the maximum operating temperature can reach 650℃; for anti-oxidation parts, the maximum anti-oxidation operating temperature can reach 850 ℃

 

ASTM A213 ASME SA-213 TP304H welding material selection
The welding performance is good, and the manual welding rod uses o102, o107, o132 or e308-15 (American brand); the argon arc welding wire uses h0cr19ni9 or er-308; if it is welded with ferritic materials, it is recommended to use ernicr3 or enicrfe-3 welding wire specified in ASME standard. Solution treatment after welding can improve the thermal strength and intergranular corrosion resistance of the welding head.

 

Quality Control System
Implementation:
Raw material PMI verification
In-process EC/UT non-destructive testing
100% dimensional inspection
All inspection records and photos are traceable, and SGS/TUV sampling reports are provided. Our three-level quality control system ensures consistent composition and performance for every batch of TP304 products, streamlining the incoming product inspection process for distributors.

 

Packaging and Marking:
Packaged in bales or laminated wooden crates, wrapped in plastic, and appropriately protected to ensure seaworthiness for transport, or as required.
Marking must comply with Specification A213/A213M. Marking must include information on whether the pipe is hot-finished or cold-finished, including but not limited to: standard, grade, size, heat number, and batch number.

ASTM A213 ASME SA-213 TP304H Stainless Steel Tubes
ASTM A213 ASME SA-213 TP304H Stainless Steel Tubes
ASME SA-213 TP304H stainless seamless steel pipe
ASME SA-213 TP304H stainless seamless steel pipe

Send Inquiry

You Might Also Like