ASTM A213 TP304L Bright Annealed Heat Exchanger U Bend Tube
Leave a message
What is an ASTM A213/ASME SA213 TP304 U-bend pipe?
The "ASTM A213" designation specifies the material standard for seamless pipe, "TP304L" indicates the specific material grade, and "bright annealing" refers to a specific heat treatment process that produces a clean, smooth, and oxide-free surface. A "U-bend" is a common structure in heat exchangers, accommodating differential thermal expansion without the need for a floating head.
Type 304L stainless steel pipe is a low-carbon, austenitic stainless steel designed for the corrosive and high-temperature environments found in heat exchangers, boilers, and condensers. ASTM A213 TP304L bright annealed heat exchanger U-bend tube is a seamless, U-shaped stainless steel pipe made from Type 304L stainless steel. A U-bend is a process in which straight pipe is cold-bent using a specialized pipe bending machine to achieve the desired U-shape.

ASTM A213 TP304L U-bend pipe specifications
Material: TP304L (UNS S30403) – low carbon version of 304 stainless steel
Process: Seamless, cold-worked, and bright annealed
Finish: Bright, smooth, oxide-free internal and external surface
Bend Radius: Customizable (typically 1.5×OD, 2×OD, etc.)
Standards: ASTM A213 / ASME SA213
Size Range: OD 6–38 mm; WT 0.5–3.0 mm; Lengths up to 30 meters (straight) before bending
Chemical Composition of SS304L (UNS S30403)
|
Element |
Content (%) |
|---|---|
| Carbon (C) | ≤ 0.035 |
| Manganese (Mn) | ≤ 2.00 |
| Phosphorus (P) | ≤ 0.045 |
| Sulfur (S) | ≤ 0.030 |
| Silicon (Si) | ≤ 1.00 |
| Chromium (Cr) | 18.0 – 20.0 |
| Nickel (Ni) | 8.0 – 12.0 |
| Nitrogen (N) | ≤ 0.10 |
| Iron (Fe) | Balance |
Mechanical Properties of SS304L (UNS S30403)
| Property | Value |
|---|---|
| Tensile Strength (min) | 485 MPa (70 ksi) |
| Yield Strength (min) | 170 MPa (25 ksi) |
| Elongation (min) | 35% |
| Hardness (max) | 90 HRB (Rockwell B) |
| Modulus of Elasticity | ~193 GPa (28 × 10⁶ psi) |
| Density | 8.0 g/cm³ |
| Melting Point | ~1400–1450 °C (2550–2640 °F) |
Applications
Heat exchangers
Condensers
Boilers and superheaters
Power generation and petrochemical plants
Pharmaceutical and food processing equipment
Packaging and Marking:
Packaged in bales or laminated wooden crates, wrapped in plastic, and appropriately protected to ensure seaworthiness for transport, or as required.
Marking must comply with Specification A1016/A1016M. Marking must include information on whether the pipe is hot-finished or cold-finished, including but not limited to: standard, grade, size, heat number, and batch number.









