ASTM A270 TP316L Sanitary Stainless Steel Welded Pipe
ASTM A270 TP316L is the standard specification for welded and seamless austenitic stainless steel sanitary pipe, commonly used in the food, dairy, and pharmaceutical industries, where hygiene and a high surface finish are critical. The standard covers the material's chemical composition, mechanical properties, dimensions, and quality control, including specific requirements for surface finish and testing to ensure suitability for sanitary applications.
GNEE supplies ASME SA270 Grade 316 seamless pipe for high-pressure and high-temperature applications. This pipe features a weld-free design and is produced from a single piece of metal through an extrusion process. These modules offer higher strength and load-bearing capacity than other similar standards. A270 Grade 316 welded pipe is a cost-effective alternative to seamless pipe. Produced in plate and strip form, it is rolled and then welded in place, with or without filler material. ASME SA270 Grade 316 ERW pipe features longitudinal seams and is welded by passing a high-voltage electric current through the metal. For any questions about our product line, please contact us for more information. Email: info@gneestainless.com

ASTM A270 Sanitary Stainless Steel Pipe Specification
ASTM A270 sanitary stainless pipe usually refers to the small pipe diameters, normally from 1/2" to 2 1/2", thickness from 0.049 in (1.24mm) to 0.15 in (3.81mm). Length can be fixed or random
The maximum outer diameter of ASTM A270 tubing is 12 inches (304.8 mm).
|
Tolerance |
a) Outer Diameter: +/- 0.2mm |
| b) Thickness: +/- 0.02mm | |
| c) Length: +/- 5mm | |
| End | PE/Plain Ends, BE/Beveled Ends |
| Technique | cold drawn |
| Application | chemical industry, decoration, building, Food plant, etc. |
| Test | Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT |
ASTM A270 TP316L Welded Pipe Equivalent Grade
| GRADE | UNS | WERKSTOFF NR. | JIS | AFNOR | BS | GOST | EN | SS |
| USA | GERMAN | JAPAN | Chile | BRITISH | EUROPE | SWEDISH | ||
| TP 316L | S31603 | 1.4404 / 1.4435 | SUS 316L | Z3CND17‐11‐02 / Z3CND18‐14‐03 | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | 2348 |
ASTM A270 TP316L Stainless Steel erw Pipe Chemical Composition
| GRADES | UNS | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | N |
| TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
ASTM A270 TP316L Stainless Steel Pipe Mechanical Properties
| Material | Heat | Temperure º F(º C) | Tensile Strength | Yield Strength | Elongation %, Min |
| Treatment | Min. | Ksi (MPa), Min. | Ksi (MPa), Min. | ||
| TP316L | Solution | 1900(1040) | 70(485) | 25(170) | 35 |
ASTM A270 TP316L Stainless Steel Welded Pipe Physical Properties
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
| ASTM A270 TP316L | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
Surface Finishes
ASTM A270 permits Mill Finish, Mechanically Polished to a variety of grit finishes, or Electropolished ID with Mechanically Polished OD.
The surface finish is 20 Ra ID maximum, 30 Ra OD maximum surface roughness measured with the profilometer reading at 90 degrees to the major polishing pattern. Our polishing techniques result in surface finishes that lead the industry. All tubing is printed with size, alloy, and heat number for full traceability.
We offer ASTM A270 TP316L sanitary tubing, primarily for use in the baking, beverage, cosmetics, dairy, food, and pharmaceutical industries. Polished tubing typically utilizes mechanical or electropolishing of the inside and/or outside diameter to meet or exceed 3-A standards, with an inside diameter polish of 20 Ra and an outside diameter polish of 150 Grit or 32 Ra.









