ASTM A312 Stainless Steel Pipe.pdf
What is ASTM A312?
ASTM A312 is a standard developed by the American Society for Testing and Materials (ASTM) that specifically addresses the manufacturing requirements and mechanical properties of austenitic stainless steel seamless and welded pipe.
The standard applies to pipes ranging in diameter from 1/8 inch (6.4mm) to 30 inches (760mm) and in thicknesses ranging from standard (SCH 5S) to form XXS (SCH XXS).
What are the differences between ASTM A312 (Pipe) and ASTM A269 / A213 (Tube)?
The core differences lie in their intended applications, sizing systems, and tolerance requirements:
A312 (Pipe): Designed specifically for fluid transport, with a focus on pressure-bearing capacity and nominal bore size. It uses the Nominal Pipe Size (NPS) system and wall thickness schedules (e.g., SCH 10S, 40S), with relatively broader dimensional tolerances.
A213 (Tube): Intended for use in boilers, superheaters, and heat exchangers; it emphasizes heat transfer efficiency and durability under high-temperature and high-pressure conditions, utilizing strict controls on outside diameter (OD) and minimum wall thickness.
A269 (Tube): General-purpose industrial/instrumentation tubing, focused on corrosion resistance and mechanical properties. It typically features smaller outside diameters and requires higher dimensional precision and better surface finish than A312.
ASTM A312 / A312M Stainless Steel Pipe Specification
| Item | Specification |
| Standard | ASTM A312 / A312M (ASME SA-312) |
| Title | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipe for High-Temperature Service |
| Manufacturing | Seamless (hot-rolled, cold-drawn) / Welded (ERW, EFW) / Heavily Cold-Worked |
| Size Range | NPS ⅛″ – 30″ (DN 6 – 750); OD 10.3 – 762 mm |
| Wall Thickness | SCH 5S – XXS (0.5 – 63.5 mm) |
| Length | 5.8 m / 6 m / 11.8 m / 12 m; single or double random; custom |
| Surface Finish | Pickled / Pickled & Polished / BA / Custom |
| Delivery Condition | Annealed / Solution Treated / Cold-Worked |
ASTM A312 Material Chemical Composition
| Grade | Carbon | Silicon | Manganese | Chromium | Nickel | Molybdenum | Sulfur | Phosphorous |
|---|---|---|---|---|---|---|---|---|
| TP304 | 0,08 | 1,0 | 2.00 | 18.0 – 20.0 | 8.0 – 11.0 | – | 0,03 | 0,045 |
| TP304L | 0,035 | 1,0 | 2.00 | 18.0 – 20.0 | 8.0 – 13.0 | – | 0,03 | 0,045 |
| TP316 | 0,08 | 1,0 | 2.00 | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | 0,03 | 0,045 |
| TP316L | 0,035 | 1,0 | 2.00 | 16.0 – 18.0 | 10.0 – 15.0 | 2.00 – 3.00 | 0,03 | 0,045 |
| TP321 | 0,08 | 1,0 | 2.00 | 17.0 – 19.0 | 9.0 – 12.0 | – | 0,03 | 0,045 |

ASTM A312 Material Mechanical Properties
| Grade | UNS | Tensile Strength Min, Ksi [MPa] |
Yield Strength Min, Ksi [MPa] |
|---|---|---|---|
| TP304 | S30400 | 75 [515] | 30 [205] |
| TP304L | S30403 | 70 [485] | 25 [170] |
| TP304H | S30409 | 75 [515] | 30 [205] |
| TP304N | S30451 | 80 [550] | 35 [240] |
| TP304LN | S30453 | 75 [515] | 30 [205] |
| TP309S | S30908 | 75 [515] | 30 [205] |
| TP310S | S31008 | 75 [515] | 30 [205] |
| TP316 | S31600 | 75 [515] | 30 [205] |
| TP316L | S31603 | 70 [485] | 25 [170] |
| TP316H | S31609 | 75 [515] | 30 [205] |
| TP316N | S31651 | 80 [550] | 35 [240] |
| TP316LN | S31653 | 75 [515] | 30 [205] |
| TP317 | S31700 | 75 [515] | 30 [205] |
| TP317L | S31703 | 75 [515] | 30 [205] |
How are the dimensions for ASTM A312 steel pipes specified?
Size Range: NPS 1/8 to NPS 30 (corresponding to a nominal outside diameter of approximately 10.3 mm to 762 mm); welded pipes can sometimes be even larger.
Wall Thickness Standards: Dimensions and wall thicknesses generally conform to ASME B36.19M (for stainless steel pipes) or ASME B36.10M (for carbon steel pipes), with common wall thickness designations including Sch 5S, Sch 10S, Sch 40S, Sch 80S, etc.
ASTM A312 Stainless Steel Pipe Dimensions & Tolerances
Outside Diameter Tolerance
| NPS Range | OD Tolerance |
| ⅛″ – 1½″ (DN 6 – 40) | +0.25 / −0.25 mm |
| Over 1½″ – 4″ (DN 40 – 100) | +0.38 / −0.38 mm |
| Over 4″ – 8″ (DN 100 – 200) | +0.51 / −0.38 mm |
| Over 8″ – 18″ (DN 200 – 450) | +0.76 / −0.38 mm |
| Over 18″ – 26″ (DN 450 – 650) | +1.02 / −0.38 mm |
| Over 26″ – 34″ (DN 650 – 850) | +1.27 / −0.38 mm |
| Over 34″ – 48″ (DN 850 – 1200) | +1.91 / −0.38 mm |
Wall Thickness Tolerance
| NPS Range | t/D Ratio | Over | Under |
| ⅛″ – 2½″ | All | +20.0 % | −12.5 % |
| 3″ – 18″ | ≤ 5 % | +22.5 % | −12.5 % |
| 3″ – 18″ | > 5 % | +15.0 % | −12.5 % |
| ≥ 20″ (welded) | All | +17.5 % | −12.5 % |
| ≥ 20″ (seamless) | ≤ 5 % | +22.5 % | −12.5 % |
| ≥ 20″ (seamless) | > 5 % | +15.0 % | −12.5 % |
Common Pipe Sizes & Wall Thickness (ASME B36.19M)
| NPS | DN | OD (mm) | Sch 5S (mm) | Sch 10S (mm) | Sch 40S (mm) | Sch 80S (mm) | Sch XS (mm) |
| ⅛″ | 6 | 10.29 | 0.89 | 1.24 | 1.73 | 2.41 | - |
| ¼″ | 8 | 13.72 | 1.24 | 1.65 | 2.24 | 3.02 | - |
| ⅜″ | 10 | 17.15 | 1.24 | 1.65 | 2.31 | 3.20 | - |
| ½″ | 15 | 21.34 | 1.65 | 2.11 | 2.77 | 3.73 | 3.73 |
| ¾″ | 20 | 26.67 | 1.65 | 2.11 | 2.87 | 3.91 | 3.91 |
| 1″ | 25 | 33.40 | 1.65 | 2.77 | 3.38 | 4.55 | 4.55 |
| 1¼″ | 32 | 42.16 | 1.65 | 2.77 | 3.56 | 4.85 | 4.85 |
| 1½″ | 40 | 48.26 | 1.65 | 2.77 | 3.68 | 5.08 | 5.08 |
| 2″ | 50 | 60.33 | 1.65 | 2.77 | 3.91 | 5.54 | 5.54 |
| 2½″ | 65 | 73.03 | 2.11 | 3.05 | 5.16 | 7.01 | 7.01 |
| 3″ | 80 | 88.90 | 2.11 | 3.05 | 5.49 | 7.62 | 7.62 |
| 4″ | 100 | 114.30 | 2.11 | 3.05 | 6.02 | 8.56 | 8.56 |
| 5″ | 125 | 141.30 | 2.77 | 3.40 | 6.55 | 9.53 | 9.53 |
| 6″ | 150 | 168.28 | 2.77 | 3.40 | 7.11 | 10.97 | 10.97 |
| 8″ | 200 | 219.08 | 2.77 | 3.76 | 8.18 | 12.70 | 12.70 |
| 10″ | 250 | 273.05 | 3.40 | 4.19 | 9.27 | 12.70 | 12.70 |
| 12″ | 300 | 323.85 | 3.96 | 4.57 | 9.53 | 12.70 | 12.70 |
| 14″ | 350 | 355.60 | 3.96 | 4.83 | 9.53 | 14.27 | 14.27 |
| 16″ | 400 | 406.40 | 4.19 | 5.08 | 9.53 | 15.09 | 15.09 |
| 18″ | 450 | 457.20 | 4.42 | 5.54 | 10.31 | 16.66 | 16.66 |
| 20″ | 500 | 508.00 | 4.83 | 6.35 | 10.31 | 17.48 | 17.48 |
| 24″ | 600 | 609.60 | 5.08 | 7.11 | 11.13 | 19.05 | 19.05 |
| 30″ | 750 | 762.00 | 5.54 | 8.26 | 12.70 | 21.44 | 21.44 |
If you're working on a specific project or order, tell me:
• What grade (e.g., TP304L vs. TP316L) or manufacturing type (seamless vs. welded) do you need?
• What are the target NPS size and schedule/wall thickness?
ASTM A312 Heat Treatment & Condition
All pipes shall be furnished in the heat-treated condition in accordance with the required heat-treating temperature and cooling requirements, pipes shall be individually quenched in water or rapidly cooled by other means (direct quenched).
The pipe shall be free of scale and contaminating exogenous iron particles. Pickling, blasting, or surface finishing is not mandatory when the pipe is bright annealed.
Corrosion & Performance by Grade
| Grade | PREN | Pitting / Crevice | Max Temp (°C) | Key Advantage |
| TP 304 / 304L | ~19–20 | Moderate | 870 | General purpose; lowest cost |
| TP 316 / 316L | ~25–26 | Good | 870 | Chloride / marine / chemical |
| TP 317 / 317L | ~33–35 | Excellent | 870 | Severe pitting / acid service |
| TP 321 / 347 | ~19–20 | Moderate | 980 (347) | 550–850 °C; no sensitization |
| TP 316Ti | ~25–26 | Good | 870 | 550–800 °C; Ti-stabilized |
| TP 309S | ~24–26 | Good | 925 | Dissimilar weld / high Cr-Ni |
| TP 310S | ~32–34 | Very Good | 1 150 | Max oxidation / scaling resistance |
ASTM A312 Stainless Steel Pipe Suppliers and Manufacturers
With experience in exporting since 2008, GNEE serves clients in over 60 countries worldwide. We provide comprehensive support to international buyers, including guidance on steel grade selection, verification of dimensions and specifications, export-compliant packaging, and logistics coordination.
We supply stainless steel pipes that meet the ASTM A312 standard, available in grades such as TP304/304L, TP316/316L, TP321, and TP310S. Our offerings include both seamless and welded pipes, which are widely used in industrial piping, chemical processing, heat exchangers, and high-temperature applications.
If you would like to learn more about the product, please click the product button below!

Delivery Time:
GNEE typically arranges shipment of in-stock ASTM A312 stainless steel pipes within 7–15 days, while customized sizes or grades may require 30–45 days, depending on quantity, production schedules, and inspection requirements.
Pipe End Processing:
ASTM A312 pipes are available with plain ends, beveled ends for butt welding, or customized end preparation. Bevel angles, end squareness, and dimensions can be checked according to project specifications and applicable standards.
We provide customized solutions for outer diameter, wall thickness, length, and surface finish to meet specific project requirements. Each shipment includes a Material Test Certificate (MTC) detailing chemical composition and mechanical properties, with full traceability supported via Heat Number.


ASTM A312 Testing And Inspection
Upon request, we can also provide additional inspection services, such as PMI/XRF (material composition analysis), ultrasonic testing, eddy current testing, and hydrostatic testing.
Mechanical Tests
Grain Size Determinations
Weld Decay Tests
Transverse or Longitudinal Tension Test
Hydrostatic or Nondestructive Electric Test
Flattening Test (option)
Radiographic Examination (option)
Intergranular Corrosion Test (option)
Weld Decay Test (option)


Standard export packaging
GNEE packages ASTM A312 stainless steel pipes according to pipe diameter, length, surface finish, and shipping requirements. Pipes are bundled with steel straps, while plastic end caps protect pipe ends from impact and contamination. Each bundle is labeled with grade, dimensions, quantity, heat number, and order identification for traceability. For export shipments, pipes are wrapped in waterproof materials and secured on suitable wooden or steel supports to reduce moisture exposure, scratches, and movement during transit. ISPM 15-compliant wooden packaging is available when required, with loading photos and packing lists provided to support cargo verification.


















