Home - Knowledge - Details

ASTM B514 N08800 Nickel Alloy Welded Pipe for Gas Processing

ASTM B514, a standard developed by the American Society for Testing and Materials (ASTM), specifically specifies the chemical composition, mechanical properties, dimensional tolerances, test methods, and technical requirements for welded nickel-iron-chromium alloy pipe.

 

UNS N08800 alloy steel is commonly known commercially as Incoloy 800 pipe. The ASTM B514 N08800 high-temperature nickel-iron-chromium alloy welded pipe we supply is designed for general corrosion and heat-resistant applications. It is produced by cold-rolling flat sheets or coils and then welding the joints together. Inert gas shielded welding, such as TIG welding, is commonly used. This welding method offers excellent resistance to high temperatures, oxidation, carburization, and chloride stress corrosion cracking, making it suitable for applications in industries such as the petrochemical, chemical, and nuclear power industries.

 

Incoloy 800 pipe

 

Manufacturing Process

Step Detail
Starting material Flat-rolled (coil/sheet) N08800 alloy
Welding Automatic welding process (AFR - Automatic Fusion Residual); no filler metal added
Cold working Performed after welding and prior to final solution treatment; may be in both weld and base metal or weld metal only
Solution anneal ~2050 °F (1120 °C), water quench
Pickling Post-anneal to remove oxide scale

 

ASTM B514 Standard Specification

Size 6.00 mm OD up to 914.4 mm OD
Thickness 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
Length Within 13500mm
Type Welded Pipes
Grades UNS N08800, UNS N08810, UNS N08120, ASTM B514 Welded Pipe

 

ASTM B514 N08800 800H Chemical Composition

UNS. Ni C Fe Si Mn S AI Ti Cu Cr
N08800 30-35 0.1 max 39.5 min 1.0 max 1.5 max 0.015 max 0.15-0.60 0.15-0.60 0.75 max 19-23


ASTM B514 N08800 800H Mechanical Properties

UNS. Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
N08800 7.94 g/cm3 1385 °C (2525 °F)

Psi – 75,000 ,
MPa – 520

Psi – 30,000 ,

MPa – 205

30 %

 

ASTM B514 / B775 / B36.19Dimensional Tolerances

Parameter Tolerance
OD (¼″ – 1½″) ± 0.005″ (± 0.13 mm)
OD (1½″ – 4″) ± 0.010″ (± 0.25 mm)
OD (> 4″) ± 0.015″ (± 0.38 mm)
Wall thickness (min) −12.5% of nominal
Wall thickness (max) No limit (welded)
Length (cut-to-length ≤ 30 ft) + ⅛″ (3.2 mm)
Length (cut-to-length > 30 ft) + ¼″ (6.4 mm)
Straightness 0.2% of length, max ⅜″

If you'd like, let me know:
• What outer diameter (OD) and wall thickness/schedule you need
• The approximate length or quantity required
• Whether you need mill test reports (MTRs) or specific end finishes (plain vs. beveled)
I can help guide you further on sourcing or technical specs.

Request a Quote Now

What are the differences between UNS N08800 (800), N08810 (800H), and N08811 (800HT)?

The primary differences among these three grades lie in their carbon (C), aluminum (Al), and titanium (Ti) content, as well as their heat treatment temperatures and grain size requirements:

UNS N08800 (800): Contains ≤ 0.10% carbon and is supplied in a standard annealed condition. It exhibits higher yield and tensile strength at room temperature (tensile strength ≥ 520 MPa) and is suitable for corrosion-resistant and general high-temperature applications below 593 °C (1100 °F).

UNS N08810 (800H): Contains 0.05%–0.10% carbon and undergoes high-temperature solution annealing; it is required to have a grain size of ASTM 5 or coarser. It offers excellent creep resistance and stress-rupture strength at high temperatures, making it suitable for service above 600 °C.

UNS N08811 (800HT): Features more tightly controlled limits for carbon (0.06%–0.10%) and the combined total of aluminum and titanium (0.85%–1.20%), providing the highest stress-rupture strength at elevated temperatures.

 

ASTM B514 UNS N08800 Nickel-Based Alloy Welded Pipe Application

Petrochemical and Refining: Key equipment for hydrogen production, such as steam methane reformers, furnace tubes and gas headers, ethylene cracker tubes and transmission pipelines, heat exchanger piping, and transfer lines.

Power Industry: Superheated steam piping and heat exchanger piping in nuclear power plants, and heat exchanger piping in supercritical boilers in high-efficiency thermal power plants.
Heat Treatment and Industrial Furnaces: Radiant tubes, muffles, and furnace rollers used in processes such as carburizing, annealing, and nitriding.
Waste Heat Recovery Systems: Boilers and heat exchangers that recover heat from high-temperature exhaust gases.

 

What Is the Difference Between ASTM B514 and ASTM B407?

Both standards cover nickel-iron-chromium alloy materials. The main differences lie in their manufacturing processes and product forms:

ASTM B514: Covers welded pipes, manufactured according to Nominal Pipe Size (NPS) and schedule wall thickness series (SCH 5S/10S/40S/80S, etc.). They are commonly used in industrial process piping systems.

ASTM B407: Covers seamless pipes and tubes without longitudinal weld seams. They offer a uniform structure and are often selected for demanding pressure-service applications. However, large-diameter seamless products may involve longer delivery times and higher manufacturing costs.

 

ASTM B514 N08800 Quality Control and Testing Requirements

Chemical composition analysis verifies that the alloy composition meets the requirements of N08800.
Mechanical property testing, such as tensile testing, verifies tensile strength and yield strength. Hydrostatic testing or nondestructive testing: Each pipeline must undergo hydrostatic testing or other nondestructive testing methods.
Weld macrostructure testing: This checks weld fusion and form quality.
Intergranular corrosion testing (if necessary): This evaluates the material's resistance to intergranular corrosion.

ASTM B514 N08800 Quality Control and Testing Requirements

 

If you have a project need for Incoloy 800 pipe, please feel free to place an order. GNEE has a large inventory of popular products for you to choose from. Available in both seamless and welded configurations, contact our factory for detailed chemical composition and free samples. We offer competitive pricing and excellent service.Email: info@gneestainless.com

 

Packaged in waterproof paper and steel strapping, these products meet standard export seaworthy packaging requirements and are suitable for various shipping methods. Custom packaging is also available upon request.

 Incoloy 800 pipe

Send Inquiry

You Might Also Like