What are the characteristics of stainless steel?
Leave a message
What are the characteristics of stainless steel?
Corrosion resistance
The corrosion resistance of stainless steel is mainly the result of chromium content. A stable layer of chromium oxide is formed on the surface of the steel to prevent chemical reactions with large chunks of the material. This oxide layer is very thin, with a thickness of 2nm-3nm, is passive (highly corrosion resistant), tough (attached to the body) and self-healing (repairs when cracked or damaged).
However, stainless steel can be corroded under certain circumstances. Uniform corrosion occurs when exposed to acidic solutions such as concentrated sulfuric acid and hydrochloric acid and alkaline solutions such as sodium hydroxide. Localized corrosion can occur in the form of pitting, crevices, and stress corrosion cracking, such as when exposed to chloride ions.

Mechanical property
Since the term stainless steel covers a wide range of materials, its mechanical properties of course vary. In general, the test values include yield strength, tensile strength, ductility, hardness, toughness, creep resistance and fatigue resistance. Specific values for thousands of different stainless steels can be found on Matmatch.
Electromagnetic properties
Stainless steel is a relatively poor electrical conductor. At 20°C, the conductivity of 18wt.% Cr.8wt.% Ni stainless steel is 1.45 × 106 S/m, while the conductivity of pure copper is 5.96 × 107 S/m.
Ferritic, martensitic and duplex stainless steels are magnetic stainless steels, while austenite is non-magnetic stainless steels. An important value that is often used to quantify this value is the relative permeability r, which is related to the magnetic susceptibility m by the equation m=r-1. The permeability of magnetic stainless steel is usually around 14, while the permeability of non-magnetic stainless steel is close to the minimum value of 1.







