What is the deviation range of 201 stainless steel plates?

What is the allowable deviation range of stainless steel plates in 201?

Let me introduce it to you by GNEE stainless steel below. The 201 stainless steel plate is acid-resistant, alkali-resistant, high-density, polishing, bubble-free, pinhole-free, etc.

The allowable deviation of the thickness of the 201 stainless steel plate is 0.2mm. The corrosion resistance of stainless steel mainly depends on its alloy composition and internal structure, and chromium plays a major role. Chromium has high chemical stability and can form a passivation film on the steel surface, isolate the metal from the outside world, protect the steel plate from oxidation, and improve the corrosion resistance of the steel plate. After the passivation film is destroyed, corrosion resistance is reduced.
The thickness tolerance of the 201 stainless steel thin plate less than 4mm should be within 5 wires, and the thickness error of the 201 stainless steel thin plate greater than 5mm to 100mm should be within 10 wires.
The allowable deviation of the thickness of the 201 stainless steel plate is generally between 0.08 and 2.00mm, and the tensile strength of the 2mm thick 201 is about 800-850MPa. The shear strength is generally 0.6~0.8 of the tensile strength.

GNEE product specifications
1,201 cold rolled stainless steel coil: 0.25mm-6.0mm Common widths: 1000mm, 1219mm, 1140mm, 1250mm, 1500mm, and can be divided.
2,201 cold-rolled stainless steel flat plate: 0.40mm-6.0mm Regular size: 1000*2000, 1219*2438, 1219*3048, 1500*3000, fixed opening 300-6000mm.
3,201 hot rolled stainless steel coil: 2.70mm-14.00mm Common width: 1250mm, 1500mm, 1800mm, 2000mm, and slit.
4,201 Hot-rolled stainless steel flat plate: 3.0mm-60.0mm Regular size: 1500*6000, 1250*6000, 1800*6000, 2000*6000, fixed opening, cutting.
5,201 Cold-rolled stainless steel strip: Thickness range: 0.2mm-2.0mm Width range: 5mm-680mm.
6. Provide surface processing (matte/brushed, 8K/mirror stainless steel plate).
201 stainless steel cold rolled (coil, tape, flat plate) Thickness: cold tie (0.5-4.0mm) Surface: 2B glossy, BA; 8K mirror; brushed, matte; snowflake sand; stainless steel fingerprint-free board decorative panel: colored board , titanium-plated plate, etching plate, oil-plated pattern plate (HL, NO.4), 3D three-dimensional plate, sand blasting plate, embossed plate.
201 stainless steel hot rolled (coil, flat plate) Thickness: hot rolled (3-165mm) Surface: NO.1 (silver white matte), brushed, matte; snowflake sand; stainless steel embossed panel.