ASTM B395 Copper Alloy U Bend Tubes for Condenser Tubes
Leave a message
ASTM B395 is a standard for U-shaped tubes for seamless copper and copper alloy heat exchangers and condensers developed by the American Society of Testing Materials (ASTM). It provides the chemical composition, mechanical qualities, dimensions, process requirements, and appropriate testing techniques for the applicable copper alloys.
ASTM B395 U-bend tubes are made of raw copper or copper alloy materials and are seamlessly processed according to the standard. You may like our B395 u-bend tubes in grade C44300, C68700, C70400, C70600, C70620, C71000, C71500.
ASTM B395 U-bend tubes are commonly employed as tube bundles in heat exchangers, condensers, and evaporators. They are typically constructed of numerous U-bend tubes organized in a specified pattern and welded to the tube sheet. The U-tubes in a U-bend tube bundle typically have multiple bending radii in order to fit more tubes into the smallest space and improve heat exchange efficiency.


Copper Alloy Common Grades & Chemical Composition
|
Grade |
Cu① |
Sn |
Al |
Ni+Co |
Pb |
Fe |
Zn |
Mn |
As |
Sb |
P |
Cr |
|
|
C10200①② |
≥99.95 |
|
|
|
|
|
|
|
|
|
|
|
O:≤10ppm |
|
C10300① |
≥99.95③ |
|
|
|
|
|
|
|
|
|
0.001-0.005 |
|
|
|
C10800① |
≥99.95③ |
|
|
|
|
|
|
|
|
|
0.005-0.012 |
|
|
|
C12000① |
≥99.9③ |
|
|
|
|
|
|
|
|
|
0.004-0.012 |
|
|
|
C12200① |
≥99.9 |
|
|
|
|
|
|
|
|
|
0.015-0.04 |
|
|
|
C14200① |
≥99.4 |
|
|
|
|
|
|
|
0.15-0.5 |
|
0.015-0.04 |
|
|
|
C19200④ |
≥98.5 |
|
|
|
|
0.8-1.2 |
≤0.2 |
|
|
|
0.01-0.04 |
|
|
|
C23000④ |
84-86 |
|
|
|
0.05 |
≤0.05 |
Rest |
|
|
|
|
|
|
|
C44300⑤ |
70-73 |
0.9-1.2 |
|
|
0.07 |
≤0.06 |
Rest |
|
0.02-0.06 |
|
|
|
|
|
C44400⑤ |
70-73 |
0.9-1.2 |
|
|
0.07 |
≤0.06 |
Rest |
|
|
0.02-0.1 |
|
|
|
|
C44500⑤ |
70-73 |
0.9-1.2 |
|
|
0.07 |
≤0.06 |
Rest |
|
|
|
0.02-0.1 |
|
|
|
C60800①⑥ |
Rest |
|
5-6.5 |
|
0.1 |
≤0.1 |
|
|
0.02-0.35 |
|
|
|
|
|
C68700①⑥ |
76-79 |
|
1.8-2.5 |
|
0.07 |
≤0.06 |
Rest |
|
0.02-0.06 |
|
|
|
|
|
C70400①⑥ |
Rest |
|
|
4.8-6.2 |
0.05 |
1.3-1.7 |
≤1 |
0.3-0.8 |
|
|
|
|
|
|
C70600①⑥ |
Rest |
|
|
9-11 |
0.05⑦ |
1-1.8 |
≤1⑦ |
≤1⑦ |
|
|
|
|
|
|
C70620①⑥ |
≥86.5 |
|
|
9-11 |
0.02 |
1-1.8 |
≤0.5 |
≤1 |
|
|
≤0.02 |
|
C:≤0.05 S:≤0.02 |
|
C71000①⑥ |
Rest |
|
|
19-23 |
0.05⑦ |
≤1 |
≤1 |
≤1⑦ |
|
|
⑦ |
|
⑦ |
|
C71500①⑥ |
Rest |
|
|
29-33 |
0.05⑦ |
0.4-1 |
≤1⑦ |
≤1 |
|
|
|
|
③ |
|
C71520①⑥ |
≥65 |
|
|
29-33 |
0.02 |
0.4-1 |
≤0.5 |
≤1 |
|
|
≤0.02 |
|
C:≤0.05 S:≤0.02 |
|
C72200①④ |
Rest |
|
|
15-18 |
0.05⑦ |
0.5-1 |
≤1⑦ |
≤1 |
|
|
⑦ |
0.3-0.7 |
⑦⑧ |
Tension Properties of ASTM B395 Common Grades
|
Grade |
Temper |
Tensile Strength, ksi [MPa] |
Yield Strength, ksi [MPa] |
Elongation in 2 in. |
|
C10200 C10300 C10800 C12000 C12200 C14200 |
H55 |
≥36 [250] |
≥30 [205] |
- |
|
C19200 |
H55 |
≥40 [275] |
≥35 [240] |
- |
|
O61 |
≥38 [26] |
≥12 [85] |
- |
|
|
C23000 |
O61 |
≥40 [275] |
≥12 [85] |
- |
|
C44300 C44400 C44500 |
O61 |
≥45 [310] |
≥15 [105] |
- |
|
C60800 |
O61 |
≥50 [345] |
≥19 [130] |
- |
|
C68700 |
O61 |
≥50 [345] |
≥18 [125] |
- |
|
C70400 |
O61 |
≥38 [260] |
≥12 [85] |
- |
|
H55 |
≥40 [275] |
≥30 [205] |
- |
|
|
C70600 C70620 |
O61 |
≥40 [275] |
≥15 [105] |
- |
|
H55 |
≥45 [310] |
≥35 [2400] |
- |
|
|
C71000 |
O61 |
≥45 [310] |
≥16 [110] |
- |
|
C71500 C71520 |
O61 |
≥52 [360] |
≥18 [125] |
- |
|
WT≤0.048in. (1.22mm) |
HR50 |
≥72 [495] |
≥50 [345] |
≥12% |
|
WT>0.048in. (1.22mm) |
HR50 |
≥72 [495] |
≥50 [345] |
≥15% |
|
C72200 |
O61 |
≥45 [310] |
≥16 [110] |
- |
|
H55 |
≥50 [345] |
≥45 [310] |
- |
Production Process of ASTM B395 U-Bend Tubes
Processing method: generally cold-worked
Processing process: first cut the tube into a suitable length, then put it into the tube bending machine and bend it into a U shape.
HR: Stress relief state → C23000, C44300, C44400, C44500, C60800, C68700
If required, the bent part of the following grades of copper alloy U-tubes should also be in HR state:
C70400, C70600, C70620, C71000, C71500, C71520, C72200
Surface Quality Requirements
O61: clean and smooth; inner and outer surfaces can have a superficial dull iridescent film
Drawn-temper: clean and smooth, inner and outer surfaces can have a drawing lubricant surface.
HR: Inner and outer surfaces can have a light oxide scale
If you want to know more details and prices of the products, please contact us in time!Email: info@gneestainless.com









