Heat treatment of SUS201 202 304 304 L stainless steel bars
Leave a message
Heat Treatment of SUS304 and SUS304L Stainless Steel Bars
| Grade | Solution Treatment | Stabilization Treatment (SUS304L Only) | Special Processing |
|---|---|---|---|
| SUS304 | 1010–1150°C water quenching | None | Cold working to increase hardness (e.g., 1/4H temper) |
| SUS304L | 1010–1150°C water quenching (lower temperature optional) | 850–900°C for 2 hours followed by air cooling (stabilizes carbides) |
Heat Treatment Process Comparison and Selection Guide for SUS201, SUS202, SUS304, and SUS304L Stainless Steel Bars
| Grade | Solution Treatment Temperature (℃) | Cooling Method | Target Properties | Typical Industries |
|---|---|---|---|---|
| SUS201 | 1050–1150 | Water quenching | Low hardness, high ductility | Decoration, daily necessities |
| SUS202 | 1080–1180 | Water quenching | High strength, moderate corrosion resistance | Machinery, marine applications |
| SUS304 | 1010–1150 | Water quenching | Balanced corrosion resistance and formability | Food processing, medical equipment |
| SUS304L | 1010–1150 | Water quenching | Post-weld corrosion resistance, anti-intergranular corrosion |

Notes on heat treatment of austenitic stainless steel bars
Temperature control:
Austenitic stainless steel is sensitive to heating temperature. Too high temperature will cause coarse grains, while too low temperature will result in insufficient dissolution of carbides.
Cooling rate:
Quenching must be performed quickly to avoid carbides from precipitating at grain boundaries (especially SUS304 series).
Surface treatment:
After heat treatment, pickling or sandblasting is required to remove the oxide scale and restore the surface finish.







